G213QAN01.0

This is a description of the AU Optronics (AUO) G213QAN01.0 LCD panel. The panel has a 19.0 inch diagonal size and a resolution of 2048 x 1536 pixels, resulting in a high pixel density of 120 pixels per inch (PPI). The pixel format is RGB vertical stripe, and the panel has an active area of 433.152 x 324.864 mm, with an outline size of 457 x 350 x 22.8 mm. The panel has a matte surface and a brightness of 800 cd/m², with a contrast ratio of 1400:1 (typical). The viewing angle is 89 degrees in all directions, with a response time of 13/12 ms (typical).

Category Industrial lcd screen Tag Industrial LCD screen

Description

G213QAN01.0

Panel Brand	AUO	Panel Model	G213QAN01.0
Panel Size	19.0 inch	Panel Type	a-Si TFT-LCD ,LCM
Resolution	2048(RGB)×1536, QXGA, 120PPI	Pixel Format	RGB Vertical Strip
Active Area	433.152(W)×324.864(H) mm	Outline Size	457(W)×350(H)×22.8(D) mm
Bezel Area(mm)	438.2(W)×330.0(H) mm	Surface	Matte
Brightness	800 (Typ.)	Contrast Ratio	1400:1 (Typ.) (TM)
Viewing Angle	89/89/89/89 (Typ.)(CR≥10)	Response Time	13/12 (Typ.)(Tr/Td) ms
Good View at	Full view	Work Mode	AHVA, Normally Black, Transmissive
Display Colors	1.07B , 100% sRGB	Backlight	WLED , 50K hours, With LED Driver
Refresh rate	60Hz	Touch Screen	Without
Panel Weight	3.20±0.332Kgs (Typ.)	Application	Industry, Medical Imaging, Outdoors Highlight
Signal Interface	LVDS (4 ch, 10-bit) ,Connector, 82 pins
Drive voltage	12.0V (Typ.)
Environment	Operating Temperature: 0~ 60 °C ; Storage Temperature: -20 ~ 60 °C

The G213QAN01.0 panel has AHVA (Advanced Hyper-Viewing Angle) technology and is normally black and transmissive. It displays 1.07 billion colors and covers 100% of the sRGB color gamut. The panel uses a WLED backlight with a lifetime of 50,000 hours and comes with an LED driver. The refresh rate is 60Hz, and the panel does not have a touch screen.

The G213QAN01.0 panel is designed for use in a variety of applications, including the medical imaging industry and outdoor settings. It weighs 3.20±0.332Kgs (typical) and has an LVDS (Low-Voltage Differential Signaling) interface with 4 channels and 10 bits, using an 82-pin connector. The drive voltage is 12.0V (typical), and the panel can operate at temperatures ranging from 0 to 60°C, with a storage temperature range of -20 to 60°C.